How to Record a Self-Tape Audition at Home
Most first auditions now arrive as a self-tape request. Here is how to set up framing, light and sound at home, work with a reader, slate correctly and send a file casting can watch without friction.

For many productions, the first round of auditions now happens on tape. A self-tape lets casting see more actors, and it lets you audition from anywhere. It also means you are the camera operator, the lighting crew and the editor. The good news: casting is not judging your production values. They want to see the performance clearly, hear every word and spend no time fighting your file.
Always read the instructions first. Casting notices often specify framing, slate content, file format, length and deadline. Whatever they ask for overrides everything below.
The setup in one table
| Element | What usually works |
|---|---|
| Camera | A recent phone is enough. Use the rear camera, locked off on a tripod at eye level |
| Orientation | Horizontal (landscape), unless the casting notice asks for vertical |
| Framing | Medium close-up: from mid-chest to just above the head |
| Background | Plain wall or backdrop in a neutral color, nothing distracting behind you |
| Light | Soft light in front of you, slightly to one side; no bright window behind you |
| Sound | A quiet, soft-furnished room; an external mic close to you if you have one |
| Reader | Off camera, next to the lens, reading at a lower volume than you |
Framing and eyeline
Place the camera at your eye level, not below your chin or looking down at you. Frame yourself from roughly mid-chest to just above the head, leaving a little space above. Keep the frame the same for the whole scene; do not zoom or move the camera.
Your reader stands or sits just beside the camera, so your eyeline is close to the lens without looking into it. Unless the instructions say otherwise, do not perform straight down the lens: casting wants to see your eyes, but not as if you are talking to them.
Light and background
- Face the light. A window in front of you or a soft lamp or ring light near the camera gives even light on your face.
- Avoid back light. A bright window behind you turns you into a silhouette.
- Keep it plain. A gray, blue or off-white wall or a simple backdrop keeps attention on you. Clear away shelves, posters and clutter.
- Check for shadows on the wall behind you; stepping a little forward from the wall usually helps.
Sound
Bad sound is the quickest way to lose a viewer. Record in a small room with soft surfaces: curtains, a sofa, a rug or even hanging blankets reduce echo. Turn off fans, air conditioning and notifications. If you use an external microphone, keep it close to you and out of frame. Ask your reader to speak a little more quietly than you, since they are much closer to the camera's microphone.
The slate
A slate is a short introduction, usually filmed as a separate clip or at the start. Common versions include your name, sometimes your height and location, and a wider shot showing your full body. Many casting offices now ask for the slate only if specifically requested, and some want specific details. Follow the notice exactly, keep it brief and natural, and smile.
Performing on tape
- Know the scene cold. You can hold your sides, but you should not be reading them.
- Make strong, specific choices. Casting is watching many tapes; a clear point of view stands out.
- Scale for the frame. A medium close-up picks up small things; you do not need stage-sized gestures.
- Do a few takes, send the best. Unless asked for options, one strong take is better than three average ones.
Editing, naming and sending
- Trim dead time at the start and end; do not add music, filters or effects.
- Name files exactly as the instructions say. If there are none, use your name, the role and the project, for example
FirstLast_RoleName_Project.mp4. - Upload in the format and through the platform requested, and check that the link works in a private browser window.
- Send it before the deadline. Late tapes are often never watched.
Common mistakes
- Vertical video when horizontal was asked for, or the other way round.
- A reader who is louder than the actor.
- Busy backgrounds, back light or a camera pointing up from a table.
- Long introductions or extra scenes nobody requested.
- Files that are hard to download or need a password casting does not have.
Questions
Should a self-tape be horizontal or vertical?
Most casting requests are for horizontal (landscape) video, but some ask for vertical. Always follow the casting notice.
Where should I look in a self-tape?
At your reader, who stands just beside the camera, so your eyeline is close to the lens without looking into it, unless the instructions tell you otherwise.
Can I use my phone to record a self-tape?
Yes. A recent phone on a tripod with good light and clean sound is enough for most self-tape requests.
What should I say in a slate?
Usually your name and whatever the casting notice asks for, such as height, location or agent. Keep it brief and only include what is requested.
Next scene
How to Slate for an Audition (In Person and on Self-Tape)
The slate is the few seconds before your audition when you introduce yourself to camera. What to say, how to look, when casting wants profiles or full-body sho…
How to Audition for Voice Acting: Home Setup, Reads and Tips
Most voice-over auditions are recorded at home and judged in seconds. The basic setup you need, how to read the specs, how to slate and deliver, and the mistak…
How to Audition for Commercials: What Casting Looks For
Commercial auditions are short, fast and often wordless. What casting looks for, how to slate, handle copy and improvise, what to wear, and how commercial acti…


